> >>Point to Point Receiver/Transmitter
Point to Point Receiver/Transmitter View larger

Point to Point Receiver/Transmitter

BOSPTP-RX/TX-2

New product

Point to Point Receiver/Transmitter

More details

The Bosch PTP-RX/TX-2 is a general purpose wireless link, The transmitter channels are simply triggered by the connection of the input terminal to GND. This can be via a momentary switch, relay or as designed, the programmable outputs from an alarm panel. The transmitter would generally be powered from this device that is being used to trigger it however any regulated 6 to 12VDC power source will work. The kit is supplied with a small switch mode 12VDC 0.5Amp plug pack which can be used to power either the transmitter or receiver.

The Bosch PTP-RX/TX kit is particularly useful for operating remote gates or doors from the alarm panel outputs of a solution system using DSRF equipment. The two RF systems operate on different frequencies thus there is no interference between the two. In the case where no wiring has been installed or allowed for, to remote devices this system is a ideal option.

12 other products in the same category:

Receivers/Repeaters

Viewed Products

© Source Security Systems - All Rights Reserved